Skip to main content

Rust Build

1) GW Tin Bitz
2)Stipple RMS Deep Red
3) Stipple GW Orange
4) Wash GW Ogryn Flesh
5) Was GW Blazing Orange

This has a nice really rusted look.

Going further with some drybrushing of mithril silver give a nice touch, followed by a wash of GW Badab Black.

Comments

Post a Comment

Popular posts from this blog

15mm/6mm Woods (WIP)

Good bye to green felt templates!  I ended up with a scrap piece of 1/4" ply wood from some home remodeling.  And while I had an urge to do some buildings for 15mm, I haven't been playing a lot of 15mm gaming lately.  So, I decided that some woods would work for both 6mm (Dirtside 2 and Strike Legion) as well as 15mm sci fi or 15mm anceints gaming (ADG). I started by: Sketching out some rough circular shapes on the 1/4" ply Cutting them out with a jig saw.  I didn't follow the lines exactly, just tried to keep near them Power sanded down the edges to give them a bit of a gradual slope Glued 3"(For 15mm) or 2" (for 6mm) around the edges, with one or two in the middle for support.  I mostly left them open as these are for gaming, not for display.  I need to fit the figures in there!  This was done with liquid nails.  I put about a pea worth of liquid nails down, pushed the nail in and gave it a bit of a twirl.   Left me with the foll...
Post a Comment
Read more

Ruined Terrain Work In Progress

 For Christmas this year I received a pretty decent sized set of various filament printed terrain.  In terms of presents, it was easy for family to acquire (Amazon is easier to navigate) and I didn't have to send them exactly what I was looking for. Unpainted Review The scale is generally 28mm or so.  Some are a little smaller, some a little bigger.  But nothing seems so crazy that I wouldn't put 32mm or 25mm on the table with them.  I sized them up, but forgot to take pictures so will try to grab some at the end, with MESBG LoTR, Age of Sigmar, 40k, Highland Miniatures and Beastarium Minis.  Nothing was so far out of scale that I wouldn't place them together. Almost no cleanup was required, just a few stray filament strands or print lines that didn't quite stick.  Probably the whole set took 10 minutes of cleaning.   Print lines are very noticeable on the rock ruins, but given that they are rocks, it didn't really bother me and I actually li...
Post a Comment
Read more

15mm Norman Javelins

The sculpts are by Khurasan.  They aren't bad, but the faces were a little rough.  Definitely below the quality you'd expect from the rest of the Dark Age line that I've seen from them. Also, I think I'll go open hand cast on them from now on.  Not a ding on Khurasan as I knew going in what I was getting, but compared to the nice straight spears on my knights, these look like my front line is throwing wet spaghetti. Little unhappy with the paint job, but its not bad for table top quality. 15mm Dark Age Javelin Elements
Post a Comment
Read more